Companaidhean saothrachaidh airson giùlan bloc cluasag ann an Sìona / Suidheachadh Bloc Bearing (UCF200 UCP200 UCFL200)
Bidh sinn an-còmhnaidh a’ dèanamh na h-obrach mar bhuidheann susbainteach a’ dèanamh cinnteach gun urrainn dhuinn sàr chàileachd a thoirt dhut a bharrachd air luach air leth freagarrach airson Companaidhean Saothrachaidh airsonBearing bloc cluasag Sìona/Suidheachadh Block Bearing(UCF200 UCP200 UCFL200), Mar sin, is urrainn dhuinn coinneachadh ri diofar cheistean bho dhiofar luchd-ceannach.Cuimhnich gun lorg thu an làrach-lìn againn gus sùil a thoirt air tòrr a bharrachd fiosrachaidh bho na toraidhean againn.
Bidh sinn an-còmhnaidh a’ dèanamh na h-obrach airson a bhith nar buidheann susbainteach a’ dèanamh cinnteach gun urrainn dhuinn sàr chàileachd a thoirt dhut a bharrachd air luach air leth airsonBearing bloc cluasag Sìona, Suidheachadh Block Bearing, Tha a 'chompanaidh againn den bheachd gu bheil reic chan ann a-mhàin airson prothaid fhaighinn ach cuideachd cultar ar companaidh a thoirt gu mòr don t-saoghal.Mar sin tha sinn air a bhith ag obair gu cruaidh gus an t-seirbheis làn chridhe a thoirt dhut agus deònach a’ phrìs as fharpaiseach sa mhargaidh a thaisbeanadh dhut
Ro-ràdh
A bharrachd air gnìomh giùlan ball groove domhainn gus luchd radial a ghiùlan, faodaidh an fhàinne stad casg a chuir air gluasad axial giùlan, structar aiseach an t-suidheachain giùlain a dhèanamh nas sìmplidhe agus meud axial a lughdachadh.
Tha sònrachadh cùil N aig a’ ghiùlan ball domhainn domhainn àbhaisteach le groove stad, agus tha sònrachadh cùil HR aig a’ bhall domhainn groove le clais stad agus fàinne stad.A bharrachd air an sin, tha ZN, ZNR agus atharrachaidhean structarail eile ann.A bharrachd air a bhith a’ giùlan luchd radial, faodaidh giùlan ball le fàinne stad casg a chuir air gluasad axial an giùlain, an structar giùlain a dhèanamh nas sìmplidhe agus meud an giùlain a lughdachadh.Mar as trice air a chleachdadh ann an càraichean, tractaran agus eile axial luchd chan eil pàirtean mòra den obair.
Iarrtas
A bharrachd air a bhith a’ giùlan luchd radial, faodaidh giùlan ball le fàinne stad casg a chuir air gluasad axial an giùlain, an structar giùlain a dhèanamh nas sìmplidhe agus meud an giùlain a lughdachadh.Mar as trice air a chleachdadh airson càraichean, tractaran agus eile axial luchd chan e obair mhòr.
Paramadairean
A' giùlan | Shaft Dia. | Meudan (a-steach.) no (mm) | Ìre luchdaidh fiùghantach bunaiteach | Ìre luchdaidh Staic bunaiteach | Cuideam | ||||||||||||||||||||||||||||
d | |||||||||||||||||||||||||||||||||
CHAN EIL. | (anns.) | (mm) | D | Bi | Be | n | m | E | a | h | R | J | P | G | ds | (kg) | (kg) | (kg) | |||||||||||||||
SER | 201 | 12 | 1.8504 | 0.2205 | 0.6260 | 0.4528 | 0.7677 | 0.4760 | 0.0421 | 0. 1575 | 0.1630 | 0.0969 | 2.0748 | 0.1969 | 1/4-28UNF | 1010 | 630 | 0.22 | |||||||||||||||
201-8 | 1/2 | 47 | 31.0 | 15.9 | 11.5 | 19.5 | 12.09 | 1.07 | 4.0 | 4.14 | 2.46 | 52.7 | 5.0 | M6X1.0 | |||||||||||||||||||
SER | 202 | 15 | 1.8504 | 0.2205 | 0.6260 | 0.4528 | 0.7677 | 0.4760 | 0.0421 | 0. 1575 | 0.1630 | 0.0969 | 2.0748 | 0.1969 | 1/4-28UNF | 1010 | 630 | 0.22 | |||||||||||||||
202-10 | 5/8 | 47 | 31.0 | 15.9 | 11.5 | 19.5 | 12.09 | 1.07 | 4.0 | 4.14 | 2.46 | 52.7 | 5.0 | M6X1.0 | |||||||||||||||||||
SER | 203 | 17 | 1.8504 | 0.2205 | 0.6260 | 0.4528 | 0.7677 | 0.4760 | 0.0421 | 0. 1575 | 0.1630 | 0.0969 | 2.0748 | 0.1969 | 1/4-28UNF | 1010 | 630 | 0.22 | |||||||||||||||
203-11 | 11/16 | 47 | 31.0 | 15.9 | 11.5 | 19.5 | 12.09 | 1.07 | 4.0 | 4.14 | 2.46 | 52.7 | 5.0 | M6X1.0 | |||||||||||||||||||
SER | 204-12 | 3/4 | 1.8504 | 0.2205 | 0.6260 | 0.4528 | 0.7677 | 0.4760 | 0.0421 | 0. 1575 | 0.1630 | 0.0969 | 2.0748 | 0.1969 | 1/4-28UNF | 1010 | 630 | 0.21 | |||||||||||||||
204 | 20 | 47 | 31.0 | 15.9 | 11.5 | 19.5 | 12.09 | 1.07 | 4.0 | 4.14 | 2.46 | 52.7 | 5.0 | M6X1.0 | |||||||||||||||||||
SER | 205-14 | 7/8 | |||||||||||||||||||||||||||||||
205-15 | 15/16 | 2.0472 | 1.3740 | 0.7520 | 0.5158 | 0.8583 | 0.6020 | 0.0421 | 0.2047 | 0.2260 | 0.0969 | 2.2795 | 0.2250 | 1/4-28UNF | 1100 | 710 | 0.27 | ||||||||||||||||
205 | 25 | 52 | 34.9 | 19.1 | 13.1 | 21.8 | 15.29 | 1.07 | 5.2 | 5.74 | 2.46 | 57.9 | 5.6 | M6X1.0 | |||||||||||||||||||
205-16 | 1 | ||||||||||||||||||||||||||||||||
SER | 206-18 | 1 | 1/8 | ||||||||||||||||||||||||||||||
206 | 30 | 2.4409 | 1.5000 | 0.8740 | 0.6260 | 0.8740 | 0.6701 | 0.0650 | 0.2205 | 0.2331 | 0.1291 | 2.6654 | 0.2250 | 1/4-28UNF | 1530 | 1020 | 0.39 | ||||||||||||||||
206-19 | 1 | 3/16 | 62 | 38.1 | 22.2 | 15.9 | 22.2 | 17.02 | 1.65 | 5.6 | 5.92 | 3.28 | 67.7 | 5.6 | M6X1.0 | ||||||||||||||||||
206-20 | 1 | 1/4 | |||||||||||||||||||||||||||||||
SER | 207-20 | 1 | 1/4 | ||||||||||||||||||||||||||||||
207-22 | 1 | 3/8 | 2.8346 | 1.6890 | 0.9370 | 0.6890 | 1,0000 | 0.7362 | 0.0650 | 0.2205 | 0.2645 | 0.1291 | 3.0944 | 0.2520 | 5/16-24UNF | 2020 | 1390 | 0.56 | |||||||||||||||
207 | 35 | 72 | 42.9 | 23.8 | 17.5 | 25.4 | 18.62 | 1.65 | 5.6 | 6.72 | 3.28 | 78.6 | 6.4 | M8X1.0 | |||||||||||||||||||
207-23 | 1 | 7/16 | |||||||||||||||||||||||||||||||
SER | 208-24 | 1 | 1/2 | 3. 1496 | 1.9370 | 1.0945 | 0.7480 | 1.1890 | 0.8905 | 0.0650 | 0.2520 | 0.3433 | 0.1291 | 3.4094 | 0.3150 | 5/16-24UNF | 2280 | 1590 | 0.72 | ||||||||||||||
208 | 40 | 80 | 49.2 | 27.8 | 19.0 | 30.2 | 22.62 | 1.65 | 6.4 | 8.72 | 3.28 | 86.6 | 8.0 | M8X1.0 | |||||||||||||||||||
SER | 209-26 | 1 | 5/8 | ||||||||||||||||||||||||||||||
209-27 | 1 | 11/16 | 3.3465 | 1.9370 | 1.0945 | 0.7480 | 1.1890 | 0.8905 | 0.0650 | 0.2520 | 0.3433 | 0.1291 | 3.6062 | 0.3150 | 5/16-24UNF | 2560 | 1810 | 0.9 | |||||||||||||||
209-28 | 1 | 3/4 | 85 | 49.2 | 27.8 | 19.0 | 30.2 | 22.62 | 1.65 | 6.4 | 8.72 | 3.28 | 91.6 | 8.0 | M8X1.0 | ||||||||||||||||||
209 | 45 | ||||||||||||||||||||||||||||||||
SER | 210-30 | 1 | 7/8 | ||||||||||||||||||||||||||||||
210-31 | 1 | 15/16 | 3. 5432 | 2.0315 | 0.1260 | 0.7480 | 1.2835 | 0.8906 | 0.0949 | 0.2953 | 0.3275 | 0.1291 | 3.7992 | 0.3740 | 3/8-24UNF | 2750 | 2020 | 0.93 | |||||||||||||||
210 | 50 | 90 | 51.6 | 28.6 | 19.0 | 32.6 | 22.62 | 2.41 | 7.5 | 8.32 | 3.28 | 96.5 | 9.5 | M10X1.0 | |||||||||||||||||||
210-32 | 2 | ||||||||||||||||||||||||||||||||
SER | 211-32 | 2 | 3.9370 | 2. 1890 | 1.1890 | 0.8740 | 1.3150 | 0.9535 | 0.0949 | 0.2953 | 0.3275 | 0.1291 | 4. 1929 | 0.3740 | 3/8-24UNF | ||||||||||||||||||
211 | 55 | 100 | 55.6 | 30.2 | 22.2 | 33.4 | 24.22 | 2.41 | 7.5 | 9.12 | 3.28 | 106.5 | 9.5 | M10X1.0 | 3400 | 2550 | 1.29 | ||||||||||||||||
211-35 | 2 | 3/16 | |||||||||||||||||||||||||||||||
SER | 212-36 | 2 | 1/4 | 4.3307 | 2.5630 | 1.2520 | 1,0000 | 1.5630 | 1.0165 | 0.0949 | 0.2952 | 0.3905 | 0.1291 | 4.5905 | 0.4370 | 3/8-24UNF | |||||||||||||||||
212 | 60 | 110 | 65.1 | 31.8 | 25.4 | 39.7 | 25.82 | 2.41 | 7.5 | 9.92 | 3.28 | 116.6 | 11.1 | M10X1.0 | 4100 | 3150 | 1.71 | ||||||||||||||||
212-39 | 2 | 7/16 |
Bidh sinn an-còmhnaidh a’ dèanamh na h-obrach mar bhuidheann susbainteach a’ dèanamh cinnteach gun urrainn dhuinn sàr chàileachd a thoirt dhut a bharrachd air luach air leth freagarrach airson Companaidhean Saothrachaidh airson Sìona Pillow Block Bearing / Setting Block Bearing (UCF200 UCP200 UCFL200), Mar sin, is urrainn dhuinn gus coinneachadh ri diofar cheistean bho dhiofar luchd-ceannach.Cuimhnich gun lorg thu an làrach-lìn againn gus sùil a thoirt air tòrr a bharrachd fiosrachaidh bho na toraidhean againn.
Companaidhean saothrachaidh airson giùlan bloc cluasag Sìona, a ’suidheachadh giùlan bloca, Tha a’ chompanaidh againn den bheachd gu bheil reic chan ann a-mhàin airson prothaid fhaighinn ach cuideachd gus cultar ar companaidh a bhrosnachadh don t-saoghal.Mar sin tha sinn air a bhith ag obair gu cruaidh gus an t-seirbheis làn chridhe a thoirt dhut agus deònach a’ phrìs as fharpaiseach sa mhargaidh a thaisbeanadh dhut